 |
04-06-2010, 09:30 AM
|
#1
|
|
Registered User
Join Date: Apr 2010
Location: helendale ca
Posts: 8
|
bris data files
I dnloaded handi ni and tried to use some old neurax.nrx files but they didn't work. the .drf files do work. Both are based on bris single files. Am I missing something? 
|
|
|
|
04-06-2010, 04:06 PM
|
#2
|
|
Registered User
Join Date: Sep 2007
Location: Tennessee
Posts: 10,588
|
Quote:
|
Originally Posted by oldman
I dnloaded handi ni and tried to use some old neurax.nrx files but they didn't work. the .drf files do work. Both are based on bris single files. Am I missing something? |
Not sure which version you are using. I don't think there is a Handifast NI. Are you thinking ALLDATA NI?? The NRX file works fine with the Handifast programs. In ALLDATA NI, you may need to rename the extension, NRX to DRF. GL
|
|
|
|
|
04-06-2010, 08:43 PM
|
#3
|
|
Registered User
Join Date: Apr 2010
Location: helendale ca
Posts: 8
|
YES ALLDATA NI. CHANGED TO .DRF BUT THE STRUCTURE IS STILL THE SAME. I DON'T KNOW IF THERE IS MORE INFO IN .NRX BUT THERE BOTH $1 DN LOADS.
I GUESS YOUR RIGHT,I'VE BEEN CALLED A IDIOT MANY TIMES. 
|
|
|
|
|
04-06-2010, 08:47 PM
|
#4
|
|
Registered User
Join Date: Apr 2010
Location: helendale ca
Posts: 8
|
ATTACHED FILE,AT LEAST I THOUGHT I DID
Last edited by oldman; 04-06-2010 at 08:49 PM.
Reason: NO ATTACHMENT?
|
|
|
|
|
04-06-2010, 11:39 PM
|
#5
|
|
Registered User
Join Date: Sep 2007
Location: Tennessee
Posts: 10,588
|
OK, I just ran the sample NRX file, AQU0207, through ALLDATA NI, and it ran without a hitch. I'm not sure what steps you are taking so I will tell you what I did. Open ALDATA NI, at the bottom, click on MAIN. Make sure you have MACROS enabled. Also, make sure you have the file in the folder C:\tsn1\. Click on the box that says, LIST RACE CARD DATA FILES. You should see the file, or files, show up in the list below. If you have results files to match, make sure they are in the folder C:\tsnresults1\. Click on, LIST RESULTS DATA FILES. They should show up in the list below. Next, click on DAILY PLAY?, if you want to handicap without results, or WITH RESULTS, if you want to handicap with results. Next, to the right, you see RACE CARD(S) SELECTION. Below that, type in the starting card # and the ending card #. Right now, they should be the same, I think we can only do 1 card at a time. Anyway, now click on RUN DATA FILES. When it finishes, click on the OK, in the little box that pops up. Then go to the bottom, and click on ALLDATA. Starting in ROW 1 and Column DP, you should see the current race card with all the races listed. Choose a race and click on it. You should be able to find your way around at this point. If you run into any problems, post them here. 
Last edited by dartman51; 04-06-2010 at 11:41 PM.
|
|
|
|
|
04-07-2010, 07:36 AM
|
#6
|
|
EXCEL with SUPERFECTAS
Join Date: Mar 2004
Posts: 10,206
|
Quote:
|
Originally Posted by dartman51
OK, I just ran the sample NRX file, AQU0207, through ALLDATA NI, and it ran without a hitch. I'm not sure what steps you are taking so I will tell you what I did. Open ALDATA NI, at the bottom, click on MAIN. Make sure you have MACROS enabled. Also, make sure you have the file in the folder C:\tsn1\. Click on the box that says, LIST RACE CARD DATA FILES. You should see the file, or files, show up in the list below. If you have results files to match, make sure they are in the folder C:\tsnresults1\. Click on, LIST RESULTS DATA FILES. They should show up in the list below. Next, click on DAILY PLAY?, if you want to handicap without results, or WITH RESULTS, if you want to handicap with results. Next, to the right, you see RACE CARD(S) SELECTION. Below that, type in the starting card # and the ending card #. Right now, they should be the same, I think we can only do 1 card at a time. Anyway, now click on RUN DATA FILES. When it finishes, click on the OK, in the little box that pops up. Then go to the bottom, and click on ALLDATA. Starting in ROW 1 and Column DP, you should see the current race card with all the races listed. Choose a race and click on it. You should be able to find your way around at this point. If you run into any problems, post them here. |
This is correct, however, I'm not sure the Neurax files have the same data field structure as the DRF and MCP files so I can't say if the PPs and Pace Ratings will reflect correct data.
|
|
|
|
|
04-07-2010, 11:10 AM
|
#7
|
|
Registered User
Join Date: Apr 2010
Location: helendale ca
Posts: 8
|
Didn't work with only 1 card did work with 9 cards. I followed the same steps in all cases, Looking forward to seeing and using your work. I know it makes me feel good when I help others and it looks like you feel the same.
Thanks for your help.
|
|
|
|
|
04-08-2010, 06:45 AM
|
#8
|
|
EXCEL with SUPERFECTAS
Join Date: Mar 2004
Posts: 10,206
|
Quote:
|
Originally Posted by oldman
Didn't work with only 1 card did work with 9 cards. I followed the same steps in all cases, Looking forward to seeing and using your work. I know it makes me feel good when I help others and it looks like you feel the same.
Thanks for your help.
|
Sounds like you have a bad data file. If 9 .nrx files worked fine, and 1 didn't, then obviously .nrx files have the same field structure or AllData would make the resulting PPs and Pace Ratings look crazy. You can probably download that file again, without charge by Brisnet, unless it has been put in the Archives already.
Send the file to me and I'll se if I can figure out what's different about that file.
My email is at the bottom of the Home page on the AllData site.
Last edited by raybo; 04-08-2010 at 06:49 AM.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
