View Full Version : Vidio Problem
Hammerhead
09-25-2005, 07:59 AM
Need a little help. When turning on my other puter it beebs 3 or 4 times and no vidio. Worked fine Friday. When I disconnect the vidio cable the screen comes on and shows a no signal message. Could the vidio card in the putter be at fault?
qhrick
09-25-2005, 02:00 PM
The beeps indicate a POST ( startup error ) Exact number of beeps may identify exact problem.
Quite possibly you have a memory or video card error
The quick and dirty attemp to fix:
- Unplug power
- open up computer
- check and reseat the following - video card, system memory:: , sometimes, especially with an addon video card, they can become slightly out of socket
I have seen exactly the problem you describe be a simple reseating of the video card
JustRalph
09-25-2005, 02:44 PM
always video or ram..........in my experience........any thunderstorms or power failures in the area recently?
Hammerhead
09-25-2005, 03:34 PM
qhrick
I,ll try that.
No Ralph no bad weather. It got half way on the boot and when I restarted it there was no vidio. That was this morning.
Hammerhead
10-21-2005, 07:16 PM
Finally looked at old puter. The vidio card was not seated properly
Thanks guys.
vBulletin® v3.8.9, Copyright ©2000-2024, vBulletin Solutions, Inc.